AS 2210.3:2019 / ASTM F2413-18 including SD (Clause 5.7)
Built to protect
The #793 safety joggers are packed with features including:
1. ULTIMATE LIGHTWEIGHT COMFORT
Made for those on the move, these joggers will keep you safe, comfortable and agile all day long.
2. RUBBER OUTSOLE—140°C HEAT RESISTANT
The outsole is heat resistant to temperatures up to at least 140°C, therefore withstanding temperatures typically encountered in the majority of industrial applications.
3. AIRPORT FRIENDLY
With a composite toe cap and nylon shank, these boots are metal-free, meaning they won't set off security detectors.
4. PU FOOTBED
Removable PU footbed which includes a pad of XRD® Extreme Impact Protection under the heel of the foot. The footbed is anti-bacterial, breathable and washable.
Designed to prevent the build up of static electricity by conducting the static change to the ground. This greatly reduces the risk of electric shock, and is best used in workplaces including petrochemical plants, airport tarmacs and anywhere you're exposed to flammable vapours.
6. COMPOSITE TOE CAP
Capable of withstanding an impact of 200 joules, they're the ideal boot if you're on your feet all day and require lightweight protection. And because they're metal free, they won't set off any metal detectors.
Removable PU foam footbed with XRD® Extreme Impact Protection heel insert for greater impact absorption and comfort
Anti-bacterial, washable and breathable footbed
XRD® Technology inserted into the forepart of the innersole
Rubber outsole has a high coefficient of friction for increased grip/slip resistance and durability
oil, acid & organic fat resistant
heat resistant to 140˚C
TPU toe guard and Heel skeletal Stabiliser
Elasticated laces for quick fastening. Standard laces are also included
Tongue pocket to hide laces and reduce trip hazard potential
Ergonomically engineered toe spring for reduced wearer fatigue
Nylon shank—ensures correct step flex point and assists with skeletal stability
Broad fitting 200 joule impact resistant composite toe cap However, if your feet are exposed to the risk of repetitive impacts, penetration or cutting hazards or electrical hazards, then we recommend that you consider one of our steel safety toe boots as they may be more suited to your needs
PU - Polyurethane | TPU - Thermoplastic Polyurethane
For light soiling, remove any caked dirt from your shoes with a dry soft bristled brush or damp cloth then immediately leave them to air dry in a well-ventilated area. Ensure that your shoes are air dried away from direct sunlight or heat sources. Never dry shoes in a clothes dryer.
For a more comprehensive clean, remove the footbed and surface wash the shoes sparingly with water and a minimal amount of mild detergent then rinse with warm water – ensure that water does not penetrate excessively inside the shoes. Hand wash only - do not soak the shoes or use a washing machine as doing so may cause permanent damage.
Wash the footbed with mild soap and water and air dry flat.
When air drying, stuff the shoes with clean dry paper (i.e. paper towels) then lie them flat on a clean surface. Once the shoes are dry, removed the stuffing and reinsert the dry footbed. Repeat cleaning as required.
Antistatic shoes require special care to maintain their conductive properties. Failing to follow these cleaning instructions correctly may affect the electrical conductivity of the sole, or cause the footwear to lose its antistatic properties. Only ever replace the factory fitted footbed with the same item specification. Refer to Blundstone antistatic footwear user information sheet for important safety advice.